The technical achievement of "multi material random distribution synchronous printing" also solves several major defects that the original 3D printing technology can hardly solve, such as:

　　印刷精度和印刷速度是瓶頸

　　Printing accuracy and printing speed are bottlenecks

　　“多材料同時打印任意分布”的打印精度高達0.001mm，無論單片面積大小，加工時間都不到1分鐘，與原始3D打印速度相差甚遠。

　　The printing accuracy of "multi material simultaneous printing with arbitrary distribution" is as high as 0.001mm, and the processing time is less than 1 minute regardless of the area of a single chip, which is far from the original 3D printing speed.

　　印刷材料的問題

　　Problems with printing materials

　　目前，所有的3D打印設備對打印材料都有嚴格的要求，這甚成為3D打印快速普及和大規模生產的主要障礙。而“多材料同時印刷任意分布”技術對材料幾乎沒有特殊的要求，只要是粉體，粒徑相差不大，就完全解決了3d打印的材料問題。

　　At present, all 3D printing devices have strict requirements for printing materials, which even becomes the main obstacle for the rapid popularization and mass production of 3D printing. The technology of "multi material simultaneous printing and arbitrary distribution" has almost no special requirements for materials. As long as it is powder, the particle size difference is not big, it completely solves the material problem of 3D printing.

　　大規模生產的問題

　　The problem of mass production

　　現在印刷材料和印刷速度的問題已經完全解決了，批量生產的問題也解決了。甚可以說，在集成電路等微加工領域，大規模生產的加工成本遠遠低于傳統加工方法。

　　Now the problems of printing materials and printing speed have been completely solved, and the problems of mass production have also been solved. It can even be said that in the field of micro machining such as integrated circuits, the cost of mass production is far lower than that of traditional machining methods.

　　彩色印刷的問題

　　Problems of color printing

　　所謂顏色3 d打印技術是通過現有的涂料(不打印材料本身)的顏色,所以它不是嚴格意義上的3 d印刷顏色,和任意分布的多個材料和印刷”技術是材料本身的顏色印刷通過直接控制方法,實現了真正的3 d印刷顏色。

　　The so-called color 3D printing technology is based on the color of the existing coating (without printing the material itself), so it is not strictly 3D printing color, and multiple materials and printing with arbitrary distribution. "The technology is that the color printing of the material itself realizes the real 3D printing color through the direct control method.

　　以上是小系列的3D打印簡單介紹，詳情請查閱網站。

　　The above is a brief introduction of a small series of 3D printing. Please refer to the website for details.